DTI Washers are washer 
load cells that are manufactured with raised dimples that are used to indicate when the proper tension level has been achieved during tightening, since tension is what we are after NOT TORQUE. DTI’s are manufactured to the F959 specification.
Finishes: Plain (black) & Mechanically Galvanized B695
DTI Washer Dimensions for Plain, Type-3 and Coated
| Size | Grade | Bumps | Min KIPS | Outside Diameter (In) | Inside Diameter (In) | Protrusion Tangential Diameter (PTD) Max. |
|---|---|---|---|---|---|---|
| 1/2 | 325 | 4 | 12.0 | 1.167-1.187 | 0.523-0.527 | 0.788 |
| 5/8 | 325 | 4 | 19.0 | 1.355-1.375 | 0.654-0.658 | 0.956 |
| 3/4 | 325 | 5 | 28.0 | 1.605-1.625 | 0.786-0.790 | 1.125 |
| 7/8 | 325 | 5 | 39.0 | 1.855-1.875 | 0.917-0.921 | 1.294 |
| 1 | 325 | 7 | 51.0 | 1.980-2.000 | 1.048-1.052 | 1.463 |
| 1 1/8 | 325 | 7 | 56.0 | 2.230-2.250 | 1.179-1.183 | 1.631 |
| 1 1/4 | 325 | 8 | 71.0 | 2.480-2.500 | 1.311-1.315 | 1.800 |
| 1 3/8 | 325 | 7 | 85.0 | 2.730-2.750 | 1.442-1.446 | 1.969 |
| 1 1/2 | 325 | 8 | 103.0 | 2.980-3.000 | 1.573-1.577 | 2.138 |
| 3/4 | 490 | 5 | 35.0 | 1.730-1.750 | 0.786-0.790 | 1.125 |
| 7/8 | 490 | 5 | 49.0 | 1.980-2.000 | 0.917-0.921 | 1.294 |
| 1 | 490 | 7 | 64.0 | 2.230-2.250 | 1.048-1.052 | 1.463 |
| 1 1/8 | 490 | 7 | 80.0 | 2.480-2.500 | 1.179-1.183 | 1.631 |
| 1 1/4 | 490 | 8 | 102.0 | 2.730-2.750 | 1.311-1.315 | 1.800 |
| 1 3/8 | 490 | 8 | 121.0 | 2.980-3.000 | 1.442-1.446 | 1.969 |
| 1 1/2 | 490 | 9 | 148.0 | 3.230-3.250 | 1.573-1.577 | 2.138 |
Acceptable compression load ranges at precisely monitored ASTM F606 test gaps
| DTI Size | A325 (000 lb) | A490 (000 lb) |
|---|---|---|
| 1/2 | 12-14 | 15-18 |
| 5/8 | 19-23 | 24-29 |
| 3/4 | 28-34 | 35-42 |
| 7/8 | 39-47 | 49-59 |
| 1 | 51-61 | 64-77 |
| 1 1/8 | 64-77 | 80-96 |
| 1 ¼ | 81-98 | 102-122 |
| 1 3/8 | 97-117 | 121-145 |
| 1 ½ | 118-143 | 148-178 |
| Source: ASTM F959-17a | ||
