Blog Archives
Rotational Capacity Test
Rotational Capacity Test Overview The Rotational Capacity test’s main purpose to test A325 & A490 high-strength bolt, nut & washer, as an assembly, to show the presence of lubrication, on galvanized nuts. The Rotational Capacity test or RC test can also test the assembly’s strength (tension,) ductility, and thread strength (threads resistance to strip.) To preform […]
ASTM F1554-15
Scope This specification covers straight, bent, headed and headless anchor bolts/rods made of carbon, medium carbon boron, alloy, or high-strength low alloy steel. Anchor bolts are used for anchoring structural supports (ie columns/sign structures) to concrete foundations. This specification does not cover mechanical expansion anchors, powder-activated nails/studs or anchor bolts fabricated from deformed bar (rebar.) […]
ASTM F3125-15
Scope The ASTM F3125-15 specification consolidates and covers high strength structural bolts, both Hex Head & TC Bolts, that previously fell under A325, A490, F1852 & F2280. Bolts manufactured under this specification come in sizes from 1/2″ to 1-1/2″ inclusive. For bolts that do not fall under the diameter and length requirements for the above grades […]
GS-111EZ TC Shear Wrench
Tone GS-111EZ TC Shear Wrench is specifically designed to be used with Tension Control (TC) Bolts. The Tone GS-111EZ TC Shear Wrench has an outer socket that turns the nut counterclockwise, while grabbing the spline of the bolt with the inner socket turning it clockwise. When the proper tension level has been achieved the spline snaps off giving you a […]
Tone 91-EZ TC Shear Wrench
Tone 91-EZ TC Shear Wrench is specifically designed to be used with Tension Control (TC) Bolts. The Tone 91-EZ TC Shear Wrench has an outer socket that turns the nut counterclockwise, while grabbing the spline of the bolt with the inner socket turning it clockwise. When the proper tension level has been achieved the spline snaps off giving you […]
Tone 61-EZ TC Shear Wrench
Tone 61-EZ TC Shear Wrench is designed to be used with Tension Control “Twist Off” Bolts. Tone 61-EZ Shear Wrench installs twist-off bolts and gives you instant installation tension verification. The 61-EZ has an outer socket that turns the nut counterclockwise, while grabbing the spline of the bolt with the inner socket turning it clockwise. Proper tension level […]
Box Bolts

Box Bolt – is an expansion bolt for structural steel connections to hollow section steel or where there is a “blind connection,” where you only have access to one side of the connection. As the bolt head is tightened, the cone is pulled up the bolt thread, causing the legs of the sleeve to expand until the cone locks the sleeve […]
Hollo-Bolts
Hollo-Bolt – an expansion bolt for Structural Hollow Sections (SHS/HSS) with “blind connections,” when you only have access to one side of the connection. As the bolt head is tightened, the cone is pulled up the bolt thread, causing the legs of the sleeve to expand until the cone locks the sleeve against the inner wall of the hollow section.Available in […]
Vertical Ferrule
Vertical Ferrule – used when shooting weld studs to a column. A vertical ferrule has half moon shape, with slots along the top half and none along the bottom. The design of the vertical ferrule is such that the lack of slots along the bottom prevent the molten material from dripping down your column during […]
Bridge Lube Nuts
Bridge Lube Nuts are used primarily in the bridge industry. They come with lubrication applied on the internal threads and on the face of the nut that will be in contact with the joint. The purpose of leaving sides of the nut and opposing face of the nut clean of lubrication is to reduce the […]
Rebar – #14 J & #18 J
Jumbo Rebar is commonly used by the tower and sign structure industries as anchor rods for large structures. The diameter of the jumbo rebar is slightly over-sized than the normal #14 & #18 rebar so that the it can be milled down to account for the differences in diameter from the rebar deformations in order to create a uniformed […]
Ogee Round Washer
Ogee Round Washers are used in wood and dock construction, they have a double curved face resembling a “S.” Domestics are available. Finishes: Hot Dip Galvanized Grade: ASTM A48 hexport – customer document portal Do you need all of your paper work, right now? No problem! Because we know that often times the certification paper work is almost […]
Dock Washers
Dock Washers are used in dock and wood construction, they are an over sized, low carbon steel. Domestics are available. Finish: Hot Dip Galvanized
Malleable Cast Iron Washer
Malleable Cast Iron Round Washers are generally used in wood and dock construction. Domestics are available. Finishes: Plain (black) or Hot Dip Galvanized Grade: ASTM A48
Star Washers
Star Washers are commonly used in restoration projects, they can be an artistic way to tie back a decorative facade. These extra large 3/4″ washers are usually combined with either a fully threaded rod or rod with thread at one end. The threaded rod is anchored in the building, with the Star Washer exposed on the […]
110EZ TC Shear Wrench – PARTS ONLY
110EZ TC Shear Wrench is specifically designed to be used with larger diameter Tension Control (TC) Bolts. It has an outer socket that turns the nut counterclockwise, while grabbing the spline of the bolt with the inner socket turning it clockwise. When the proper tension level has been achieved the spline snaps off giving you a visual indication of proper installation. The […]