Blog Archives
90EZ TC Shear Wrench – PARTS ONLY
By 90EZ TC Shear Wrench has been discontinued and replaced by the Tone 91EZ TC Shear Wrench. The 90EZ TC Shear Wrench is specifically designed to be used with Tension Control (TC) Bolts. It has an outer socket that turns the nut counterclockwise, while grabbing the spline of the bolt with the inner socket turning it clockwise. When the proper tension […]
80EZA TC Shear Wrench – PARTS ONLY
80EZA TC Shear Wrench is specifically designed to be used with Tension Control (TC) Bolts in connections with tight tool clearance. It has an outer socket that turns the nut counterclockwise, while grabbing the spline of the bolt with the inner socket turning it clockwise. When the proper tension level has been achieved the spline snaps off giving you […]
60EZA Shear Wrench – PARTS ONLY
The Tone 60EZA Shear Wrench has been discontinued and replaced by the Tone 61-EZ TC Shear Wrench. 60EZA Shear Wrench Tone Shear Wrenches are designed to work with a Tension Control Bolt assembly, consisting of a twist-off bolt, a nut and a washer. The twist-off bolt is manufactured with a dome head and a spline at the end […]
Outside Angle Ferrules
By Outside Angle Ferrules are used when welding to the heel of a (usually 90 degree) beam. When shooting weld studs to an outside angle it is very important to tell your sales representative that you need an outside angle ferrule, without it the welder will not be properly shielded from the weld arc and you will […]
Inside Angle Ferrules
Inside Angle Ferrules The ferrule helps to shield the arc from the operator, it minimizes the atmosphere that the flux must purge, the ferrule helps form the molten metal into the fillet, while allowing the fillet vents allow weld gases to escape. Ferrules are disposable items and as disposable items they are mass manufactured quickly and inexpensively. Ferrules are […]
Thru Deck Ferrules
Thru Deck Ferrules are used when shooting weld studs through corrugated metal decking to the steel beam. The Thru Deck Ferrule has wider teeth than a standard Flat Ferrule due to the corrugated metal decking surface is different than shooting straight to the steel beam. The ferrule helps to shield the arc from the operator, it […]
Heavy Duty Ferrules
Heavy Duty Ferrules The ferrule helps to shield the arc from the operator, it minimizes the atmosphere that the flux must purge, the ferrule helps form the molten metal into the fillet, while allowing the fillet vents allow weld gases to escape. Ferrules are disposable items and as disposable items they are mass manufactured quickly and inexpensively. Ferrules are […]
Pitch Diameter Ferrules
Pitch Diameter Ferrules The ferrule helps to shield the arc from the operator, it minimizes the atmosphere that the flux must purge, the ferrule helps form the molten metal into the fillet, while allowing the fillet vents allow weld gases to escape. Ferrules are disposable items and as disposable items they are mass manufactured quickly and inexpensively. Ferrules are […]
Full Diameter Ferrules
Full Diameter Ferrules The ferrule helps to shield the arc from the operator, it minimizes the atmosphere that the flux must purge, the ferrule helps form the molten metal into the fillet, while allowing the fillet vents allow weld gases to escape. Ferrules are disposable items and as disposable items they are mass manufactured quickly and inexpensively. Ferrules are […]
Arc Weld Studs
Arc Weld Studs Pitch Diameter and Full Thread Studs are the two most common types of Standard Drawn Arc Weld Studs. The primary advantage of a Pitch Diameter Stud versus a Full Thread Stud is in shear value. Due to the slightly larger base diameter, the Pitch Diameter Stud will have a higher shear value […]
Deformed Bar Anchors
Deformed Bar Anchors – are low carbon-steel devices designed to increase holding power in concrete and maximize material strength in applications where substantial load supporting (shear tension) forces are present on embedments. Used in the following situations: Precast columns Tee and beam connections Seismic shear walls Securing steel plates to concrete structures Material: Low carbon steel, ASTM […]
Shear Connector Weld Studs
Shear Connector Weld Studs are unthreaded with an upset head. Designed to interconnect the concrete slab to the load bearing steel beams. Because of the inter connection or composite construction resists shear loading between the concrete and steel beams. Meets with AWS and all other applicable specifications. Used in all types of concrete connections. They can be welded to […]
Headed Concrete Weld Studs
Headed Concrete Weld Studs also known as Weld Studs, are unthreaded with an upset head. The typical use is for anchoring steel plates and shapes in concrete structures. Our Headed Concrete Weld Studs meets AWS and all other applicable specifications. Weld Studs join a stud and another piece of metal together by heating both parts with an arc. […]
SET-XP
SET‑XP® is a 1:1 two-component, high-solids, epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete. SET-XP® adhesive exceeds ICC-ES AC308 and 2009 IBC requirements and has proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. SET-XP® adhesive is teal in color. […]
SET
SET® is a two-component, 1:1 ratio, high-solids, epoxy-based adhesive for use as a high strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV and V Grade 3, Class B and C. Not sure […]
ET-HP
ET-HP ® is a two‑component, high‑solids epoxy system for use as a high‑strength, non‑shrink anchor grouting material. ET-HP’s resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. Features Passed demanding adverse-condition tests of ICC-ES AC308 in elevated temperatures and long term sustained load Suitable for use under static and seismic loading conditions […]
EDOT
EDOT Epoxy Anchoring Adhesive is formulated specifically for transportation projects. EDOT™ is a two-component, high-solids epoxy system. It is designed for use as a high-strength, nonshrink anchor grouting material providing an economical and high-strength solution for transportation applications. Click here for specific state DOT approvals. Shelf Life – 24 months from date of manufacture in an unopened […]
AT-XP
AT-XP® has been formulated for high-strength anchorage of threaded rod and rebar into concrete and masonry under a wide range of conditions. AT-XP dispenses easily in cold or warm environments with little to no odor, and when mixed properly is a dark teal color for easy post-installation identification. Features Can be used under static […]
AT
AT is a two-component, high-solids, 10:1 ratio, acrylic-based adhesive for use as a high strength, anchor-grouting material. Formulated for use in all types of weather, AT is designed to dispense easily and cure at temperatures down to 0°F. Resin and initiator are dispensed and mixed simultaneously through the mixing nozzle. AT meets the physical requirements of […]
Titen HD
Titen® HD a high-strength, self-undercutting, non-expansion, screw anchor for cracked or uncracked concrete and masonry, under both static and seismic loading conditions. The Titen HD anchor is ideal for structural applications, even at reduced edge distances and spacing. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications. Models: Titen HD, Titen HD Mini, Titen […]