Blog Archives
Wedge-All
By Wedge-All® wedge anchor is a non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled concrete masonry. Available in a threaded stud and (single size) tie-wire models. Threaded studs are set by tightening the nut and are code-listed for grout-filled masonry applications only. The Tie-Wire version is set with the claw end of a […]
Strong Bolt
Strong Bolt is a wedge anchor specifically designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2009 IBC places on post-installed anchors. The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or “follow-up” expansion if a crack forms and intersects the anchor location. This significantly […]
Strong Bolt 2
Strong Bolt 2 is a wedge anchor for cracked and uncracked concrete. It received classification a Category 1 anchor*, the highest attainable anchor category for performance in cracked concrete under static and seismic loading. Available in stainless steel, it is code-listed by ICC-ES under the 2012 IBC requirements for post-installed anchors in cracked and uncracked concrete. Available […]
Turnbuckles
Turnbuckles are used to provide length and tension adjustment of tie rods and hanger assemblies. They are widely used in structural steel bracing and pipe support applications. Our forged turnbuckle bodies are manufactured to meet ASTM F1145, Type 1, Grade 1 Class B. They also meet the dimensions and load ratings shown in the American […]
Clevis Pins
Clevis Pins connections are a cost effective method of connecting two structural members which are subjected to simple tension loads. They make possible straightforward and rapid field installation of bracing and support members. Because pin connections normally do not clamp the connected members, they are generally only recommended for use in connections where they are […]
Clevises
Clevises are used to connect tie rods and hanger assemblies to structural steel or fabricated lugs. The pin connection ensures that the rod is loaded only in tension and sees no bending forces. Our clevises are widely used in structural steel bracing and pipe support applications. Finishes: Plain (black) & Galvanized. Haydon stocks clevis forgings in […]
Sleeve-All
Sleeve-All ® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials. Available in acorn, hex, rod coupler, flat or round head styles in a variety of finishes and sizes for a wide range of applications. Material: Zinc Plated Carbon and Stainless Steel Head Styles: Hex, Phillips (Flat) Head, Acorn, Round & […]
Short Drop-in Anchor
Short Drop-In Anchors are for use in solid and hollow concrete. The short length permits shallow embedment that helps to avoid drilling into rebar or prestressing strands. The wide surface flange enables the Short Drop-In to be installed in deep or bottomless holes. Fixed-depth drill bits are also available to take the guess work out of […]
Lipped Drop-in Anchor
Lipped Drop-In Anchors feature a lip at the top of the anchor body that keeps the top of the anchor flush with the concrete. This eliminates the need for precisely drilled hole depths and allows for easier flush installation, consistent embedment and uniform rod lengths. Click here for the most recent Code Reports Click here for […]
Drop-In & Coil Thread Anchors
Drop-In Anchors & Coil-Thread Drop-In Anchors – Internally threaded expansion shell anchors. Drop-In Anchors are internally threaded, deformation-controlled expansion anchors with a pre-assembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in […]
Threaded Rod
Threaded Rod – available in 6′ & 12′ bar lengths, Haydon stocks both foreign and domestic threaded studs, and can also manufacture fully threaded studs out of any round bar grade that we carry. Introducing Hexport®, our customer document portal Do you need all of your paper work, right now? No problem! Because we know that often […]
Sleeve Nuts
Sleeve Nuts are used to couple tie rods of the same diameter and provide a limited degree of length adjustment (typically 4-5 inches). They are often used in place of turnbuckles when high strength rods are specified. Normally sleeve nuts come with right hand thread on one end and left hand thread on the other end to […]
Lock Nuts
Lock Nuts (Anco Lock Nut) is a nut which provides extra resistance to vibration loosening by a stainless steel ratch pin in the top of the nut that “bites” into threads when fully tightened. Diameters: 1/4 to 1-1/2 in stock, other diameters are available. Finishes: Plain (black) & Galvanized. Other styles of Lock Nuts are available upon request, contact […]
Hex Nuts & Jam Nuts
Hex Nuts or Finished Hex Nuts are manufactured to the A563, A194 or F594 (Stainless Steel) specifications. Domestic and Import in Stock Notes: As per the A563 spec, “The requirements for any grade of nut may, at the supplier’s option, and with notice to the purchaser, be fulfilled by furnishing nuts of one of the stronger grades specified herein […]
Heavy Hex Nuts
Heavy Hex Nuts are washer faced, are slightly larger and thicker than standard hex nuts. The heavy hex pattern is typically used for large diameter and high strength bolts. Finish: Plain & Galvanized Grades: A563 Grade A,C,C3,DH,DH3 & A194 Grade 2H Sizes: 1/2″ up to 4″ diameter Domestic or Foreign are available and in stock! Note: Galvanized nuts are always […]
Coupling Nuts
Coupling Nuts are used to make up long tie rod assemblies from shorter lengths of rod and to facilitate assembly of two fasteners or fittings which both have external threads. Coupling nut dimensions are described by the Industrial Fasteners Institute, in IFI-128. NOTES REGARDING STRENGTH *When high strength rods are specified, coupling nuts produced to […]
Acorn Nuts
Acorn Nuts are used for safety and appearance because of their high crown caps that cover exposed threaded ends, and add a finished look to a project. Diameters: 1/4″ through 7/8″ Finishes: Plain & Stainless Steel. ***Galvanized is not a stock item and is a special make only*** Materials: […]
A193 Grade B7
Information: We offer Eye Bolts in a variety of finishes and sizes. Please contact us for your specific needs.
Hardened Bevel Washers
Hardened Bevel Washers are commonly used when fastening bolts through the flanges of an I beam. These washers are manufactured to the F436 specification for hardened steel washers. Finishes: Plain (black) & Galvanized
Squirters (DTI)
Squirter® DTI Washers are hardened DTI (Direct Tension Indicator) washers that when the proper tension has been applied to the washer, a colored silicone material will squirt out giving you a visual indication that the proper tension has been achieved. Squirter DIT’s are manufactured to the ASTM F959 specification Finishes: Plain (black) & Galvanized Available in all […]